Top » Catalog » Vinyl, Transparent » vin2tpcolour48
 
0
$0.00
Categories
Vinyl, Transparent
Manufacturers
Information
Mactac
MACcrystal 8400 48"
[vin2tpcolour48]
$17.50 /yd
Regular Price:$17.50 /yd
Available Options:
Qty (yd):  
8400:  

MACmark 8400 is a glossy transparent coloured film used in the manufacture of illuminated signs made from opaline acrylic sheets and for windows decoration. MACmark 8400 is manufactured in such a way so as to guarantee uniform colour reproduction, and is coated with a long-life durable, highly cohesive acrylic pressure sensitive adhesive, which is protected with a high quality siliconized kraft paper liner.

CONSTRUCTION
Face material :

Glossy transparent coloured vinyl film, 80 μm thick, cadmium-free.

Adhesive :
Acrylic based pressure-sensitive, very cohesive and highly durable.

Liner :
Highly stable 140 gsm bleached kraft paper with blue backprinting.

TYPICAL USES
MACmark 8400 can be used for windows graphics and for illuminated signs.
Suitable for outdoor and indoor applications.

DURABILITY
3 years.
These use-life estimates are based upon accelerated ageing studies and outdoor exposure, under conditions experienced in vertical exposure and in West Europe.
Note : Exposure to severe temperatures, ultraviolet light or conditions in southern European countries, as well as in tropical, sub-tropical or desert regions, will cause a more rapid deterioration. This also applies to polluted areas, high altitude, horizontal and south-facing exposure.

Temperature ranges :
Application : + 10°C to + 40°C
End-use : - 40°C to + 70°C

Flammability
Tested to ISO 3795
Sample mounted on aluminium : self-extinguishing.

Solvent and chemical resistance
Resistant to most oils and greases, fuel, aliphatic solvents, weak acids, salts and alkalis.

PROCESSING
Computer cutting

Clean, quick, trouble-free cutting with most plotters. Adjustment of the cutting depth is important : if the cut is too deep this could result in the paper splitting and coming away with the adhesive when the vinyl is transferred to Application Tape.

Application
The transfer of the cut vinyl onto the Application Tape should always be performed by removing the liner from the pressure-sensitive material (i.e. with the PVC face downwards onto the working surface) and not by lifting off the Application Tape.
We recommend the wet application method on flat surfaces.

Important remark
All surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination.
Care should be taken when selecting a substrate for use in illuminated devices with self-adhesive materials. Some substrates, e.g. polycarbonate, can cause problems because of "bubbling".
It is therefore recommended that trials be conducted to establish the compatibility of MACmark 8400 with the application substrate.

Please note not all colours shown on the colour swatch are available, the ones listed on the drop down menu are currently stocked.

  WJT Sign Supply is not responsible for typographical or photographical errors.
  Prices are listed in Canadian funds and specifications are subject to change without notice.
  WJT Sign Supply
  1160 Tapscott Road, Unit 7, Scarborough, Ontario, Canada M1X 1E9
  Tel: 905-475-2632
Copyright © 2005 WJT Sign Supply.
Powered by osCommerce