Description

Concept® 117 is a double-coated pressure sensitive 1.0 mil clear polyester film with 200-4985 permanent adhesive on
one side and 200-4999 removable adhesive on the other side. Concept® 117 has a 3.2 mil clear air egress liner on the
removable adhesive side to assure smooth bubble free application. This clear liner allows the graphics to be viewed after
lamination with Concept® 117. This product is designed for laminating thin flexible plastic films and papers under 10 mils
in total thickness for temporary application to glass. The permanent AP adhesive is protected by a 1.5 mil clear polyester
liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.

Applications
This clear mounting film is designed to produce two sided decals using digital prints,
screen printed and other printed images for application to glass. These decals are cleanly
removable. In all cases the substrates must be clean and free of dust, dirt and oil.
May be used on substrates other than glass but your specific application must be
thoroughly tested before production.

Thickness
Carrier Film: 0.9 to 1.0 mils
Adhesive: 0.8 to 1.0 mils each side.
AP Liner: 1.4 to 1.6 mils
Air Egress Liner: 3.0 to 3.4 mils.
(Thickness variance +/- 10%)

Temperature Ranges
Minimum application temperature: +40°F.
Service temperature range: -40°F to +180°F.

Exterior Application
Removability of 200-4999 adhesive from standard window glass is up to 6 months under
normal exposure conditions.